Horizontal Splice Closure
l Excellent sealing performance,reusable. Protection grade is IP 68.
l Installation Method: wall-mounted, aerial,pipe-lined,manhole
l Easy in operation and good in practicality.
l Inner and external push button can insure good sealing,requirements of cable torque , stretching, pressure, bending.
l Vulcanized sealing can meet the Φ8—Φ23 (mm)optical cable sealing needs with excellent re-package performance.
l The ambient temperature ranges from -40 to +65℃.
The scope of application is: aerial, underground, wall-mounting, wall-mounting in duct and handhole.
OFS-SCH-01J Fiber Optic Splice Closure Datasheet
Size (mm) L×W×H
Cable Ports (max)
Max diameter of cable (mm)
Weight (excluding outside box)
Φ8—Φ23 (mm) (mm)
Name of components
Protecting fiber cable splices in whole
Fixing the housing
Fiber optic splice tray
Max 8 pieces (bunchy) or 6pcs ( ribbon)
Fixing heat shrinkable protective sleeve and holding fibers
Bunchy:12,24(cores) Ribbon:6 (pieces)
Fixing reinforced core of fiber cable and fiber optic splice tray (FOST)
Sealing between FOSC cover and FOSC bottom
Sealing empty ports
After injecting air it is used for pressure testing and sealing testing
Configuration as per requirement
Earthing deriving device
Deriving metallic components of fiber cable in the FOSC for earthing
Configuration as per requirement
The process of installing FOSC
1 Step One - Open the closure
1.1 Cleaning the locale and determine where to install the FOSC and then place fiber
1.2 Check whether the main components and accessories have been well prepared
inside the package.
1.3 Open the closure
①. Demount the fixing bolt of insert plate with a special wrench. Put the fixing
bolt into the hole of screw thread next to the fixing hole of the insert plate and
push the insert plates out with the special wrench.
② Use the special wrench to demount all the locating bolts on the housing as
well as fixing bolts (it is also possible to install hanging hook depending on the
installation requirement) at four corners, then succeed in opening the closure.
Important issues: If the weather condition is not good enough, then a tent must be pitched
for waterproof and dustproof.
2 Step Two -Determine length of fiber cable to be fixed and stripped inside FOSC
2.1 ①. Fiber cable in 70mm length: the distance from seal fitting to fiber cable pressboard
②. Fiber cable in 2030mm length: it is used to be winded and spliced after stripping.
③. Fiber with protective coat in 430mm length: the distance from the fixing
point of fiber cable to the fixing point of FOST (fiber optic splice tray).
④. Fiber in 1600mm length: after stripping off the protective coat, it is to be winded
inside the FOST after splicing with other fibers
1. Reserve enough length of fiber cable to be spliced.
2. Stripping length also could be decided by customer according to installation requirement.
3 Step Three – Strip off fiber protective coat of fiber cable and fiber
3.1 Strip off protective coat of fiber cable from the temp. locating mark with the cutter and the stripper. Please refer to Drawing 2 for stripping length. Stripping length also could bedecided according to installation requirement
Important issues: If it is difficult to pull all the protective coat of fiber cable at one time,
stript it off section by section to avoid fiber breakage.
PAYMENT & SHIPMENT
Standard payment terms: T/T 30% DEPOSIT,70% BANLANCE before shipping.
Online trade assurance order,all is up to you.
More payment terms could be provided(PAYPAL,WESTERN UNION,MONEYGRAM).
Delivery time:Generally it is 1-2 days if the goods are in stock,or it is 2-4 days if the goods are not in stock,it is according to quantity.
CE Certificate CE Certificate FCC Certificate
Supplier Assessment Certificate ISO Certificate
If you find our products interested, please fill the below blank space your detailed requirements. OPTFOCUS’s team would offer different solutions to you within 12 hours. Free samples are also available.