Gigabit Ethernet Managed Industrial Switch 8 Compatible Ethernet Port-2 SFP Port

Introduction

OFS-PE-MIGSF2T8 PoE+ network is Gigabit Ethernet switch, with 8 compatible 10/100/1000BaseT (X), 802.3af (PoE) and 802.3at (PoE+) and 2 Gigabit Ethernet port SFP port. Each PoE+ port can provide 30W power supply, the highest output 36W to the receiving equipment, such as IP camera, high-performance wireless AP and industrial grade IP phone. Support for a variety of management functions, including ERPS, STP/RSTP, PoE power management, PoE device automatic detection, PoE power supply troubleshooting, PoE diagnosis, IGMP, VLAN, QoS, bandwidth management and port mirroring. Designed specifically for severe outdoor applications, the 4KV OFS-PE-MIGSF2T8 surge protection can be adapted to harsh outdoor environments to ensure uninterrupted power supply for PoE systems.

Characteristic

Built in 8 PoE+ Ethernet port, compatible with IEEE 802.3af/at standard

Each PoE+ port supplies up to 36 W

Support for port based PoE management, effective monitoring of electrical equipment

4KV Ethernet port surge protection for harsh outdoor environment

Full load working in -40 ~ 85 or C temperature

Advanced PoE management functions (Port Based PoE management, power distribution, PD fault detection)

• support rich management features, support SNMP V2C, CLI command line, Web network management, TELNET, make equipment management more convenient

• support port aggregation and improve the reliability of the link through multi link backup

• support ACL control strategy, support L2 (Layer2) - L4 (Layer4) packet filtering function to protect network security

• support rich QoS strategy to provide flexible flow classification and queue scheduling algorithm

• support Port-based VLAN, IEEE 802.1Q VLAN, simple network planning

• support G.8032 (ERPS) standard Ethernet ring protection technology, recovery time <20ms

• support IGMP Snooping to prevent multicast network flooding, effectively saving multicast network bandwidth

- support DHCP Snooping, to prevent the illegal DHCP servers, improve network security

• support LLDP protocol, can quickly find two layer network topology information and topology change information, simplify network management

• support 802.3x flow control, can provide lossless Ethernet Service

• support SPAN mirror function, you can monitor the network traffic in order to detect and troubleshoot network

• support broadcast storm suppression function, prevent excessive broadcast, multicast data flooding in the network, enhance network robustness 

Safety certification:

Safety：GB4943-2011

EMC：GB9254-2008

EMS：

ESD (IEC 61000-4-2) Level 4 (8K/15K)

RS (IEC 61000-4-3) Level 3 (10V/m)

EFT (IEC 61000-4-4) Level 3 (1V/2V)

CS (IEC 61000-4-6) Level 3 (10V/m)

PFMF (IEC 61000-4-8)Level4（30A/m）

Surge (IEC 61000-4-5) Power Port: ±2kV/DM, ±4kV/CM;

Data Port: ±2kV/DM, ±4kV/CM

L2  Agreement：

G.8032 (ERPS)、IEEE802.3、IEEE802.3u、IEEE802.3z 、IEEE802.3x、IEEE802.3ad、IEEE802.1p、IEEE802.1x、IEEE802.3ab、IEEE802.1Q、IGMP Snooping

Specifications

PortS：

Fiber Ports:100/1000Base SFP

RJ45：10/100/1000Base(TX) MDIX

POE：V+,V+,V-,V- Corresponding pin 1,2,3,6（Endspan MDI Alternative A）

Console：RS232，Phoenix 6

LED：P1, P2,1000M LINK,10/100/1000 ACTIVE, SFP LINK/ACTIVE

Exchange attribute：

Priority queue: 8

VLAN number: 4K

MAC address table: 16K

Package buffer: bit 8M

Packet forwarding rate: 26.7Mbps

Exchange delay: <10us

Power：

Input voltage: PoE (+):48 (46 ~ 57 V) VDC, dual redundant input

Non PoE:10-60 VDC, dual redundant input

Power consumption: motherboard power consumption 8W, PoE maximum power consumption 124W

Over current protection: support

Connection: Phoenix 6 core socket

Reverse protection: support

Mechanical properties：

Case: IP30 protection grade, metal case

Size: 143X104X48mm (W * H * D)

Weight: 1Kg

Installation: DIN card rail type

Environmental Science：

Storage temperature: -40 degrees C to 85 degrees C

Storage humidity: 5% to 90% RH

Working temperature: -40 degrees C to 85 degrees C

Working humidity: 10% to 90% RH

Ordering Information

PAYMENT & SHIPMENT

Packaging

Each product is packed in a high quality PE bag, Then put into a box or carton and secured by 2 inserts.

Last put each box into pallets and properly wrapped for sea or air voyage.

Payment

Standard payment terms: T/T 30% DEPOSIT,70% BANLANCE before shipping.

Online trade assurance order,all is up to you.

More payment terms could be provided(PAYPAL,WESTERN UNION,MONEYGRAM).

Shipping

Delivery time:Generally it is 1-2 days if the goods are in stock,or it is 2-4 days if the goods are not in stock,it is according to quantity.