Unmanaged Industrial Ethernet Switch

Unmanaged Industrial Ethernet Switch

Description The development of hubs has resulted in a device called an unmanaged switch. It enables routing of messages from one port to another, making them more intelligent than hubs. Unmanaged switches automatically detect the network speed of each network device. In addition, it has a...

Chat Now

Product Details

Description

The development of hubs has resulted in a device called an unmanaged switch. It enables routing of messages from one port to another, making them more intelligent than hubs. Unmanaged switches automatically detect the network speed of each network device. In addition, it has a function called "MAC Address Table" that recognizes and memorizes devices on the network. In other words, if port 2 receives a message with a specific identification code, then the switch will send all messages with that particular identification code to port 2. This intelligence avoids message collisions and improves transmission performance, a huge improvement over hubs. However, unmanaged switches cannot implement any form of communication detection and redundancy configuration.

Specification

Fiber Ports: one 100BaseFX ports (SC/ST/FC/LC connector, optional)

RJ45:two 10/100BASE-T RJ45

Transmission mode: full duplex mode

backplane bandwidth:1Gbps

Packet forwarding rate:0.744Mpps

MAC: 1K

Buffer:512K

delay time:<3μs 

Exchange: Store - forward 

Housing: metal material

Cooling: natural cooling, no fan

Dimensions: 143 x 104 x 48mm (wide x deep x high)

weight: 0.85Kg

Operating temperature: -40℃ ~ +85℃

Storage temperature: -40 ℃~ +85 ℃

Relative humidity: 5~95% (no frost)

Transmission distance twisted pair: 100m (using CAT5e, CAT6 network cable))

Twisted pair: 100m (CAT5e, CAT6)

Multi-mode: 2km

Single-mode: 20, 40,60, 80,100,120Km,optional

MTBF:100,000 hours

Power 

Input voltage: DC10~58V (dual power redundancy backup)

Access terminal: Phoenix terminal

Power (full load) <3W

Feature

The product has a 100M fiber port and a 2 * 10 / 100Base-T adaptive Ethernet interface RJ45. It helps users implement Ethernet data exchange, aggregation and remote optical transmission. The device has no fan, low power consumption, convenient use, small size and simple maintenance. The product design conforms to the Ethernet standard, increases lightning protection and anti-static protection measures, and has a wide operating temperature range of -40°C to +85. The performance is stable and reliable.

Application

The device can be widely used in intelligent transportation, telecommunications, security, financial securities, customs, shipping, electricity, water conservancy, oil fields and other broadband data transmission.

Product front panel

图片46.jpg

Previous:10/100M 2 Port Unmanged Industrial Switch Dual Fiber SM 10KM-120KM Guide Rail Type Next:Guide Rail Type Industry Ethernet Switch 10/100M 4 ETH Port-1 Port FX Dual Fiber SM 10-120KM

Inquiry